# How to use WebRTC dialing in the browser

> Follow a practical checklist to connect a browser dialer to a PBX and test incoming and outgoing calls.

URL: https://webrtcclient.com/blog/webrtc-dialing-in-the-browser/ | Published: 2023-04-21

![The WebRTC Client webphone in dark mode on a desktop monitor in an office](https://webrtcclient.com/img/product/webphone-v3.png)

WebRTC dialing lets you make and receive phone calls in a compatible browser when a browser softphone is connected to a suitably configured PBX. Start with a working extension, configure the connection, allow microphone access and test calls in both directions.

## Gather what you need

Before setup, have the following available:

- A compatible browser and a reliable network connection.
- A PBX or VoIP service configured for WebRTC and SIP over WebSocket.
- The extension and connection details supplied by your administrator.
- A microphone and speaker, or a headset.
- Access to WebRTC Client and permission to use the intended extension.

The PBX still controls routing and calling permissions. A browser dialer alone does not provide a phone number or an outside line.

## Configure the PBX and client

1. Ask the PBX administrator to prepare an extension and the WebRTC connection. Confirm the signaling endpoint, credentials and any network requirements.
2. Configure the user and PBX connection in WebRTC Client. Keep credentials protected and use the details supplied for that extension.
3. Open the dialer in a compatible browser and sign in. Allow microphone access when the browser asks.
4. Select the appropriate microphone and speaker or headset in the available audio settings.
5. Confirm that the extension is registered before placing a call.

The [quick-start guide](https://webrtcclient.com/guides/quick-start/) is a useful starting point. PBX-specific instructions are available in the [guides](https://webrtcclient.com/guides/), including Asterisk and other supported systems.

## Make and receive a test call

Enter a number allowed by your PBX dial plan and start a call. Confirm that the other person can hear you and that you can hear them. Then call your extension from another phone and answer in the browser. Test any transfer or hold workflow your team needs as well.

If registration fails, check the server address, credentials and WebSocket configuration. If a call connects without audio, check browser microphone permission, device selection and network settings. Firewalls and network address translation can affect media; the [STUN server guide](https://webrtcclient.com/guides/stun-servers/) offers related guidance.

## Make dialing easier

Once calling works, a web phonebook and presence buttons can help users find contacts. The Chrome click-to-call extension can send a `tel:` link's number to the dialer, reducing manual entry. Keep the PBX and browser configuration documented so support staff can repeat the setup for new users.

## Key takeaways

- A configured PBX and WebSocket connection are required for browser dialing.
- Grant microphone access and select the correct audio devices.
- Test incoming and outgoing calls and audio in both directions.
- Check registration and media settings separately when troubleshooting.
